Quantum SuperLoader 3 Manual page 2

Quantum SuperLoader 3: Rackmount Replacement
6-68061-01 Rev A
December 2013
Required Tools and Kits
SuperLoader 3
Replacement Rack Rail
Kit Contents
Table 1 SuperLoader 3 Rack
Rail Kit Contents
Component
2
SuperLoader 3) will not exceed the current rating of the power distribution
unit or outlet receptacles.
5 Secure the help of at least one other person. At least two people are
required to safely reinstall the SuperLoader 3 into a rack cabinet.
WARNING: Failure to take these safety steps may result in personal injury
or equipment damage.
Caution: Never remove the top cover of the SuperLoader 3. Removing
the top cover could result in damage to the SuperLoader 3.
Make sure you have the following tools.
• (1) #2 Phillips screwdriver
• (1) Level (required when placing SuperLoader 3 into the rack cabinet)
Make sure you have the following kits:
• Replacement Rack Rail Kit
Verify the contents of the SuperLoader 3 Replacement Rack Rail Kit you received
from Quantum.
Description
10-32 x 1/4 inch button head screws
Support brackets
Preparing to Replace the SuperLoader 3 Rackmount
Quantity
8
(4 per support
bracket)
2