Cleaning the shaver
We recommend cleaning the shaver after each use.
1. Turn the shaver off and disconnect the
AC adaptor.
2. Apply some hand soap and some
water to the system outer foil.
• Close the cleaning shutter.
3. Turn the shaver on.
There are two ways to clean the shaver,
depending on the actual dirt level.
▼
ES-ST6N_2N_CH.indb
41
▼
▼
▼
To remove light dirt
4. Slide the cleaning
shutter until it clicks.
5. Clean the outer foil
section with running
water.
6. Turn the shaver off.
• Rinse with water and
shake up and down
several times to
remove the water.
▼
▼
To remove heavy dirt
4. Turn the shaver off
after 10 – 20 seconds.
5. Remove the outer foil
section and turn the
shaver on.
6. Clean the shaver and
the outer foil section
with running water.
• Rinse with water and
shake up and down
several times to
remove the water.
▼
41
2016/05/18
17:17:10