Panasonic ES‑ST6N Manual page 42

▼
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the
shaver, and the trimmer
completely.
• Allow the shaver to dry in the
shade, avoid direct sunlight
and then apply oil.
9. Lubricate the shaver.
It will keep the movement of the
blade smooth and maintain a
comfort shave.
1. Apply one drop of oil to each
of the system outer foils.
2. Raise the trimmer and apply
a drop of oil.
3. Switch the shaver on, and
run it for approximately fi ve
seconds.
4. Switch off the shaver, and
wipe off any excess oil from
the system outer foil with a
soft cloth.
►Notes
• Do not use any kitchen or bathroom detergents other
than hand soap.
Doing so may cause malfunction.
42
ES-ST6N_2N_CH.indb 42
▼ • Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or
discoloration of the parts.
Wipe with diluted soapy water.
• Be careful not to hit the main body on the sink or any
other object while draining the water. Failure to do so
may cause malfunction.
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See page 43.)
►Cleaning with the long brush
Clean the outer foil section,
system outer foil, the shaver
body and the trimmer using
the long brush.
►Cleaning with the short brush
• Clean the inner blades using the
short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the blades
as it will damage the inner blades
and affect their sharpness.
2016/05/18 17:17:10