Panasonic ES‑ST6N Manual page 43

Replacing the system outer foil and the
inner blades
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift
the outer foil section upwards.
►Attaching the outer foil section
After turning the water inlet surface to the
front, securely attach the outer foil section
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
2. Align the water inlet surface and
the system outer foil mark ( ) and
securely attach together.
• Do not press the system outer foil
release buttons with excessive
force.
Doing so may bend the system
outer foil, preventing complete
attachment to the foil frame.
ES-ST6N_2N_CH.indb 43
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
►Note
Do not throw away the foil frame.
►Replacement parts
Replacement parts are available at your dealer or
Service Center.
System outer foil
Replacement parts for
ES ‑ ST6N/ES ‑ ST2N
Inner blades
WES9087
WES9068
43
2016/05/18 17:17:11