Powering Up - Yamaha PORTATONE PSR-OR700ж Owner's Manual

Powering Up

n
Before you switch your PSR-OR700 on or off, first turn down the volume of any connected audio equip-
ment.
1
Press the [STANDBY/ON] switch.
The Main display appears in the display.
When you're ready to turn off the power, press the [STANDBY/ON]
switch again.
2
Setting the volume
Use the [MASTER VOLUME] dial to adjust the volume to an appropriate
level.
Air Vents
CAUTION
This instrument has special air vents in the top panel (see below) and rear panel. Do not
place objects where they might block the air vent, since this may prevent adequate ven-
tilation of the internal components, and possibly result in the instrument overheating.
Air Vents
SCALE TUNE
CAUTION
In order to avoid possible
damage to the speakers or
other connected electronic
equipment, always switch on
the power of the PSR-OR700
before switching on the
power of the amplified speak-
ers or mixer and amplifier.
Likewise, always switch off
the power of the PSR-OR700
after switching off the power
of the amplified speakers or
mixer and amplifier.
PSR-OR700 Owner's Manual 17