Multi Pad Step Recording (Edit) - Yamaha PORTATONE PSR-OR700ж Owner's Manual

Yamaha electronic keyboard user manual
Hide thumbs Also See for PORTATONE PSR-OR700ж:
Table of Contents

Advertisement

10
Turn Repeat of each pad On or Off by using the [1 π
tons.
If the Repeat parameter is on for the selected pad, playback of the corre-
sponding pad will continue until the MULTI PAD [STOP] button is pressed.
If the Repeat parameter is off for the selected pad, playback will end auto-
matically as soon as the end of the phrase is reached.
When you press the Multi Pads of which the Repeat is turned on during Song
or Style playback, playback will start and repeat in sync with the beat.
11
Turn Chord Match of each pad On or Off by using the [5 π
[8 π
† ] buttons.
π †
π
π
If the Chord Match parameter is on for the selected pad, the corresponding
pad is played back according to the chord specified in the chord section of
the keyboard generated by turning [ACMP] on, or specified in the LEFT
voice section of the keyboard generated by turning [LEFT] on (when turning
the [ACMP] off).
12
Press the [D] button, then enter a name for each Multi Pad by
(page 130).
13
Press the [I] button, then save the Multi Pad data as a Bank contain-
ing a set of four Pads to the USER drive or USB storage device
(page 64).

Multi Pad Step Recording (EDIT)

Step Recording can be executed in the EDIT page. After selecting a Multi Pad in
step 5 of the Multi Pad Realtime Recording on page 128, press the TAB [ √ ][ ® ]
buttons to select the EDIT tab. The EDIT page indicates the Event list that lets you
record notes with absolutely precise timing. This Step Recording procedure is
essentially the same as that for Song Recording (pages 148–157), with the excep-
tion of the points listed below:
• There is no menu for switching channels, since Multi Pads contain data for only a
single channel.
• In the Multi Pad Creator, only the channel events can be entered and the System
Exclusive messages can be edited. Chord and Lyrics events are not available. You
can switch between the two types of Event Lists by pressing the [F] button.
Multi Pad Creating (Multi Pad Creator)
† ] - [4 π
† ] but-
π †
π
π
π †
π
π
† ]–
π
π †
π
Multi Pads indicated with the fol-
lowing icon (hand on fretboard)
are created with special note
transpositions to produce the
natural chord voicing of the gui-
tar. Because of this, if the Chord
Match setting is set to off, the
Multi Pads may not sound appro-
priately.
PSR-OR700 Owner's Manual
129

Advertisement

Table of Contents
loading

Table of Contents