Deleting An Unneeded Panel Setup/Naming A Panel Setup - Yamaha PORTATONE PSR-OR700ж Owner's Manual

Parameter Lock
You can "lock" specific parameters (e.g., effect, split point, etc.) to make
them selectable only via the panel control — in other words, instead of via
Registration Memory, One Touch Setting, Music Finder, Song or incoming
MIDI data, etc.
1 Call up the Parameter Lock display.
[FUNCTION] [J] UTILITY
→ → → →
ETER LOCK
2 Select the desired parameter by using the [1 π
then lock it with the [8 π
Deleting an Unneeded Panel Setup/Naming a
Panel Setup
The panel setups can be deleted or named individually as desired.
1
Press the REGIST BANK [+] and [–] buttons simultaneously to call up
the REGISTRATION BANK Selection Display.
2
Press one of the [A]–[J] buttons to select a bank to be edited.
3
Press the [8 † † ] (EDIT) button to call up the REGISTRATION EDIT Dis-
†
†
play.
4
Edit the panel setups.
• Deleting a panel setup
Press the [5 † ] button to delete a panel setup (page 69).
• Renaming a panel setup
Press the [1 † ] button to rename a panel setup (page 70).
The number above the
file name corresponds
to the REGISTRATION
MEMORY [1]–[8] but-
tons.
5
Press the [8 π π ] (UP) button to return to the REGISTRATION BANK
π π
Selection display.
TAB [ √ ][ ® ] CONFIG 1
→ → → → → → → →
π † π π
π ] (OK) button.
π π
Recalling the Registered Panel Setups
[B] 3 PARAM-
→ → → →
† ]–[7 π † ]buttons,
† † π † π π † †
PSR-OR700 Owner's Manual 133