Editing The Volume And Tonal Balance (Mixing Console); Basic Procedure - Yamaha PORTATONE PSR-OR700ж Owner's Manual

Editing the Volume and Tonal Balance (MIXING CONSOLE)

About Parts
See below.
Instantly setting all parts to
the same value
Once you've selected a parame-
ter in step 4, you can instantly
set the same value to all other
parts. To do this, simultaneously
hold down one of the [A]–[J] but-
tons, and use the [1]–[8] buttons
or the DATA ENTRY dial.
84 PSR-OR700 Owner's Manual
Editing the Volume and Tonal Balance
(MIXING CONSOLE)
The Mixing Console gives you intuitive control over aspects of the keyboard parts
and Song/Style channels, including volume balance and the timbre of the sounds.
It lets you adjust the levels and stereo position (pan) of each Voice to set the opti-
mum balance and stereo image, and lets you set how the effects are applied.

Basic Procedure

1
Press the [MIXING CONSOLE] button to call up the MIXING CON-
SOLE display.
1, 3
4
2
Use the TAB [ √ ][ ® ] buttons to call up the relevant setting display.
For information on the available parameters, see the section "Adjustable
items (parameters) in the MIXING CONSOLE displays" on page 85.
3
Press the [MIXING CONSOLE] button repeatedly to call up the MIX-
ING CONSOLE display for the relevant parts.
The MIXING CONSOLE displays actually consist of several different
part displays. The part name is indicated at the top of the display. The
various MIXING CONSOLE displays alternate among the following:
PANEL PART display → STYLE PART display → SONG CH 1-8 display →
SONG CH 9-16 display
4
Press one of the [A]–[J] buttons to select the desired parameter.
5
Use the [1 π † ]–[8 π
π † π †
π †
† ] buttons to set the value.
π † π †
π †
2
4
5