Before using for the first time
Allow the refrigeration appliance to
stand for approx. 1 hour before
connecting it to the power supply.
This will prevent potential functional
problems with the refrigeration
appliance.
Packaging material
Remove all packaging material from
the inside of the appliance.
Always remove all packaging
material, including adhesive tape,
before switching on the refrigeration
appliance. The adhesive tape is
difficult to remove from cold
surfaces.
Cleaning
Please refer to the relevant
instructions in "Cleaning and care".
Clean the inside of the appliance and
the accessories.
Initial commissioning
Choosing the right door assistant
(Push2open/Pull2open)
The door assistant helps you to open
the appliance door.
You can choose between the two door
assistants
Push2open
"Selecting additional settings –
Switching on the
The default door assistant is
Select the
Pull2open
door assistant if your
refrigeration appliance has a furniture
front with a handle.
Select the
Push2open
door assistant if your
refrigeration appliance has a handle-
free furniture front.
and
Pull2open
").
Door assistant
Push2open
(see
.
61