Miele F 2411 Vi Operating And Installation Instructions page 70

Selecting additional settings
– Adjusting the duration of the
AutoClose function
You can also adjust the duration for
how long the appliance door will remain
open until it closes automatically.
 In Settings mode , use the 
and  sensor controls to select
assistant and select OK to confirm
your selection.
 In Settings mode , use the 
and  sensor controls to
select
AutoClose
confirm your selection.
 Use the  and  sensor controls to
select the duration (5 to 30 seconds)
and touch OK to confirm your
selection.
To protect against inadvertent
opening: if you do not pull the
appliance open, it will close again by
itself after a duration defined by you.
Switching on Pull2open
 In Settings mode , use the 
and  sensor controls to select
and select OK to confirm
assistant
your selection.
 Use the  and  sensor controls to
select Mode and select OK to confirm
your selection.
 Use the  and  sensor controls to
select
Pull2open
confirm your selection.
 Touch the  sensor control to return
to the previous menu level.
70
Door
and select OK to
Door
and select OK to
– Adjusting the intensity
You can also adjust the intensity of the
function. The lower the set
Pull2open
intensity, the less force required when
you pull the appliance door.
 In Settings mode , use the 
and  sensor controls to select
assistant and select OK to confirm
your selection.
 In Settings mode , use the 
and  sensor controls to
select Intensity
confirm your selection.
 Use the  and  sensor controls to
select the right intensity (
) and select OK to confirm your
High
selection.
and select OK to
Low , Medium
Door
,