Miele F 2411 Vi Operating And Installation Instructions page 74

Selecting additional settings
Deactivating Miele@home
 In Settings mode , use the 
and  sensor controls to
select Miele@home
confirm your selection.
 Use the  and  sensor controls to
select Deactivate
confirm your selection.
Deactivation successful
display.
 Confirm the message with OK.
Your refrigeration appliance is now
disconnected from your WiFi network.
The  symbol will go out on the
display.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you will need to
reactivate the connection.
 In Settings mode , use the 
and  sensor controls to
select Miele@home
confirm your selection.
 Use the  and  sensor controls to
select Activate
confirm your selection.
Activation successful
display.
 Confirm the message with OK.
If the WiFi connection is active,  will
appear on the display.
74
and select OK to
and select OK to
will appear on the
and select OK to
and select OK to
will appear on the
Checking the WiFi connection status
 In Settings mode , use the 
and  sensor controls to
select Miele@home
confirm your selection.
 Use the  and  sensor controls to
select Connection status
to confirm your selection.
Information about the WiFi connection
status will then appear on the display:
-  connected: there is a strong
connection
-  connected: there is an average
connection
-  connected: there is a weak
connection
- : disconnected
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your refrigeration appliance.
 In Settings mode , use the 
and  sensor controls to
select
Miele@home
confirm your selection.
 Use the  and  sensor controls to
select Set up again
confirm your selection.
Reset configuration?
display.
 Use the  and  sensor controls to
select Yes or No
confirm your selection.
and select OK to
and select OK
and select OK to
and select OK to
will appear on the
and select OK to