ROVE R2-4K User Manual page 40

Time-Lapse 1fps & G-Sensor: (See how this feature works)
When this feature is set to ON and ROVE's 3-Lead Hardwire
1
Kit is installed properly.
Then, when you turn OFF the car's engine and turn the key
2
to the lock position.
Then the camera will STOP the continuous video recording
3
and it will go into the timelapse 1fps recording mode
automatically.
Now while this timelapse is being recorded, If someone hits
4
your car and if the impact reaches the set G-Sensor level, then
the camera will stop the timelapse video > then it will start to
record 1-min continuous video, save & lock that video in RO
folder > then return to recording the timelapse 1fps.
NOTE
(When the Parking Mode got activated, the camera will give you
voice alert stating "Parking Mode got activated while you were
away" when you turn ON your car the next time. If you hear this,
you should check the locked videos to see what happened.)
Now when you start your car for the next time, the camera
5
will automatically STOP the timelapse 1fps & G-Sensor
parking mode. Then it will go into normal video mode
automatically to start the continuous video recording.
USER MANUAL
40