Do you have a question about the R2-4K and is the answer not in the manual?
Questions and answers
Clair Stevens
March 17, 2025
How to set time zone for New York
1 comments:
Mr. Anderson
March 17, 2025
To set the time zone for the ROVE R2-4K in New York, follow these steps:
1. Go to System Settings > Date/Time. 2. Choose either manual time zone setup or GMT setup based on GPS signal. 3. If setting manually, select Eastern Time Zone (GMT -5:00) when Daylight Savings Time is not active (November - March) or GMT -4:00 during Daylight Savings Time (March - November). 4. If using GPS-based time, the camera will automatically adjust once it locks onto the GPS signal.
This will ensure the correct time zone for New York.
Page 1
Please Read Please Read MODEL: R2-4K U S E R M A N U A L U S E R M A N U A L www.rovedashcam.com Copyright (C) 2020, All rights reserved...
Page 2
EMAIL US help@rovedashcam.com For faster response text us TEXT US 1 (401) 484-ROVE(7683) Scan the QR Code to Email US Scan the QR Code to Text US Just Scan the QR Code with your iPhone or Android’s Camera to get in touch with us.
Page 3
WATCH HOW TO VIDEOS Visit our website www.rovedashcam.com/pages/videos Understanding ROVE R2-4K Watch HOW-TO VIDEOS to learn & understand all the features so you can get the maximum benefit out of it.
@24 fps Digital Vehicle Dash Cam (Automobile Black Box). This product provides high quality image capture and irrefutable evidence for what goes on from the perspective of your dashboard. Rove Dash Cam is a very elegant, convenient and durable multi-vehicle driving recorder. PRODUCT OVERVIEW This Product is a leading Ultra HD Digital Vehicle Black Box Recorder.
Time Lapse Video Parking Mode Built-In Speaker & Microphone 24hr Auto Trigger Parking Mode (ROVE’s 3-Lead Hardware Kit is required) NOVATEK NT-96660 Chipset + SONY IMX335 Sensor 4K Ultra-HD 2880x2160P @24fps 150° Ultra-wide A+ Viewing Angle Loop Cycle and Split Recording Mode Emergency Video Lock Button Up to 512GB Class 10, U3 Speed for 4K Video is required.
USER AGREEMENT By purchasing ROVE Dash cam, it is assumed that by default you agree with precautions, user warnings and all the terms & conditions of warranty. If for any reason you do not agree with any of the terms mentioned in this manual, then you may return the product in its original packaging unused within its return window for a full refund.
Page 8
USER MANUAL Do not place the camera loose on top of the dashboard or in-front of the air bags. Do not mount the camera where it can be a distraction if it became loose and fall off the windshield while driving. Do not expose this device to an excessive heat, dust or use any chemical substance or cleaning solvent to clean this device.
Getting Started OUT OF THE BOX INSTRUCTIONS Please read and understand warnings & safety instructions before operating. Make sure to always keep the camera plugged into power, because camera’s internal battery is NOT intended to last more than 3-5 minutes depending on the video resolution you choose.
Page 10
USER MANUAL ROVE R2-4K Car dash cam is programmed to turn ON and START RECORDING automatically when it receives power, and STOPS RECORDING and turns OFF automatically when power gets disconnected within 4-5 seconds . (i.e. when you start /stop your car) Setting Date &...
CAMERA SPECIFICATIONS Chipset / Sensor NOVATEK 96660 / SONY IMX335 LCD Screen 2.4 Inch TN Lens 150° A+ Ultra HD Wide Angle Video Resolu�on 2880x2160P @24fps (4K) 2560x1440P @30fps 2304x1296P @30fps 1920x1080P @60fps (FULL HD) 1920x1080P @30fps 1280x720P @120fps (Can Play: SLOW-MO VIDEO) 1280x720P @60fps 1280x720P @30fps Photo Resolu�on...
Page 12
USER MANUAL Loop Recording Support – seamless recording Mo�on Detec�on Support Parking Mode Support 24hr Auto Trigger Parking Mode Support Year/Month/Day/Hour/ Support Minute/Second Mic / Speaker Built-in Micro Phone & Speaker Mini USB Func�on 1. Storage, 2. Charging, 3. Webcam Auto Power ON/OFF Support Power Interface...
12FT Mini-USB Car Charging Cable 2.5FT Mini-USB Data Cable & Car Wire Trim Tool ROVE Dual USB Car Charger Quick Start Guide User Manual PLEASE NOTE : Memory Card Is NOT Included. We Recommend SAMSUNG Class 10, U3 Speed Micro-SD Card, UP to 512GB...
USER MANUAL UNIT STRUCTURE APPEARANCE & BUTTONS Reset Built-In GPS Windshield Serial Number Mount Latch Label TV Out Menu/Mode Bu�on UP or Mute on/off Bu�on Emergency Lock or WiFi on/off Bu�on Down or LCD on/off Bu�on Rec. On/Off, OK or Confirm Bu�on Mini-USB Power Input / Data output slot...
SHORTCUTS & UNDERSTANDING BUTTONS BUTTON IMAGE BUTTON NAME SHORTCUTS / FUNCTIONS To Turn ON The Camera: Press power bu�on once. POWER To Turn OFF The Camera: Long press power bu�on for 2-seconds. BUTTON Press once while video is being recorded to take a quick snap shot. Press Once - to enter/exit menu se�ngs MENU / MODE LONG PRESS for 2-Seconds - to Switch Modes...
Make sure to clean your windshield from the dust particles and an evaporated grease from the dashboard surface. Attach the ROVE R2-4K with the suction mount. Set the camera lens to pointing forward to the center when installing NOTE Make sure that the camera’s view is not obstructed by any window...
Page 17
Use the power cord to connect the USB Port of the product to car's cigarette lighter socket. Only use ROVE’s USB Car Charger, otherwise the camera may CAUTION frequently reboot or flicker LCD due to insufficient power.
Page 18
USER MANUAL Adjust the lens angle of the camera. Loosen the screw to adjust the camera’s view angle Simply rotate the and then tighten to camera 360 lock that angle. record any direction you prefer. Start the engine and check if the product works properly. CAUTION Make sure to remove the Plastic Lens Screen Protector from the lens before recording videos.
Page 19
Dash Cam Lighter Plug Wiring at a glance Charging Only use the supplied charger to power and charge the Rove R2-4K dash cam. NOTE You can use your iPhone or Android Phone’s USB Charger, and plug into your home’s 110V Wall outlet to power/charge the camera while in your home.
USER MANUAL TURNING YOUR CAMERA ON/OFF AUTO POWER ON/OFF Auto Power ON: ROVE R2-4K Dash Cam is designed to turn ON and start recording automatically when it receives power. i.e. when the car engine is started. Auto Power OFF: The camera is also pre-configured to turn itself OFF automatically within few seconds when the power gets disconnected, i.e.
HOME SCREEN Recording Status Loop Recording Timer Wide Dynamic Range Video Mode Video Resolution (Resets every loop) Loop Recording Total Trip Time Motion Detection (Resets every loop) Parking Mode Indicator Exposure Value G-Sensor Microphone Indicator Memory Card Indicator Current Time Battery Indicator Current Date Live Speed...
USER MANUAL LED STATUS LIGHT INDICATOR BLINKING RED LED - Recording Video SOLID RED LED - Not Recording Video NO RED LED - Camera is Turned OFF SOLID GREEN LED - Internal Ba�ery Charging NO GREEN LED - Internal ba�ery fully charged DIFFERENT SCENARIOS When Camera Is Plugged Into The POWER Solid...
If you experience camera FREEZING or LAGGING or STOPS Recording after few seconds. Then It is the issue of the MEMORY CARD. (NOT THE CAMERA ISSUE) - Please Contact US. ROVE R2-4K Dash Camera is High Bit-Rate 4K Video recording device. Which requires High Speed Rating SPECIFIC Micro-SD Cards.
FORMATTING MEMORY CARD Press to STOP video recording first or to clear the error message. If you have any on the screen. Please press the button once to enter the video settings. Press the button again to switch to the System Settings. Format Default Setting Firmware Version...
USER MANUAL TIME-ZONE SETTING: To set the date & time, choose one of the following options below: You can choose date and time of your choice manually, go to System Settings > Date/Time and select the date and time of your choice.
It is NOT a cloud or an IP camera and it is NOT meant to do that. You can get live video and footage on ROVE R2-4K’s APP as long as you stay within the 10FT range from the dash cam.
LOCK BUTTON for 2-seconds to turn the WiFi Mode On from the camera. CONNECT WiFi: Now Simply join the ROVE R2-4K WiFi by going into your iPhone or Android phone’s Settings > WiFi > ROVE R2-4K WiFi. Then Enter the default password: 12345678. Then JOIN the network.
Page 29
For Android phones: There is one extra step you will have to take for he first �me. Once you connect to ROVE R2-4K WiFi, it will say “No Internet”. Which is fine. Wait about 10-15 seconds un�l you see the below pop up or no�fica�on.
USER MANUAL UNDERSTANDING 3 – CAMERA MODES ROVE R2-4K has 3 different camera modes: VIDEO MODE PHOTO MODE PLAYBACK MODE TO SWITCH MODE: Press & Hold “M button for 2-seconds. Each Mode has their own separated Menu settings. NOTE •...
Page 31
2. PHOTO MODE: Photo mode lets you take a snapshot. While in the Photo Mode: Press button to take a snapshot • Press button to ZOOM IN • Press button to ZOOM OUT • Press MEbutton to enter Photo Mode’s Menu Settings •...
USER MANUAL Playback Your Recorded Videos There are 3 different way you can access your videos. A. Directly On The CAMERA by switching to the PLAYBACK MODE You can do this by pressing and holding the button for two seconds so it will switch from Video mode to Photo mode.
Page 33
B. On PC/MAC To play on your PC/Mac, simply connect the camera using included short USB Data cable and choose the Connect as USB Flash Drive on the camera when this message pops up. Connect to PC/MAC Connect as USB Flash Drive Connect as PC/MAC Webcam Operate Camera Normally You can simply remove the memory card from camera and insert it...
Page 34
Once you find the added flash drive, double click in it, then you will see the R2-4K folder where you will find your unlocked videos. You will also see a folder named "RO" which means read-only, where...
Page 35
Correct Video Player To Play 4K VIDEOS: We recommend VLC Media player. You can get it free at www.videolan.org You can also use our GPS Player from our website for free to view the google maps from www.rovedashcam.com...
Page 36
C. On Smart Phone To play on Smart Phone, simply turn on WiFi first from the camera, then connect the ROVE R2-4K WiFi by entering the defalt password “1234 567 8” Once connected, simply open the correct ROVE APP for your model.
UNDERSTANDING CAMERA SETTINGS Short press Key to enter the setting interface after power on. In this case, the video recording will be stopped and you get the Settings Menu. Attention: To EXIT the Settings Menu, Press the button to go back. VIDEO SETTINGS VIDEO RESOLUTION You can choose the video resolution you like.
Page 38
USER MANUAL Wide Dynamic Range (WDR) improves the exposure by taking the combinations of over exposed and under exposed image into one robust wide range of lighting with higher depth image. • ON (Default) • EXPOSURE This feature allows you to adjust the brightness of a captured image. •...
Page 39
• OFF (Default) • 24HR AUTO TRIGGER PARKING MODE NOTE ROVE’s custom-designed 3-Lead Hardwire Kit is required to use this new feature. You can purchase separately by visiting “www.rovedashcam.com” OPTIONS : • • Time-Lapse 1fps & G-Sensor •...
Page 40
USER MANUAL Time-Lapse 1fps & G-Sensor: (See how this feature works) When this feature is set to ON and ROVE’s 3-Lead Hardwire Kit is installed properly. Then, when you turn OFF the car’s engine and turn the key to the lock position.
Page 41
Motion Detection & G-Sensor: (See how this feature works) When this feature is set to ON and ROVE’s 3-Lead Hardwire Kit is installed properly. Then, when you turn OFF the car’s engine and turn the key to the lock position.
Page 42
USER MANUAL RECORD AUDIO Rove r2-4k-- has built-in microphone to record audio with video. You can choose to record mute video by choosing OFF. You can also press UP button to mute/un-mute while video is being recorded. • • ON (Default)
Page 43
triggered due to physical or gravitational impact force on the camera, the current loop cycle length of video file will be locked so it will NOT be deleted by loop cycle function. Parking Mode: G-Sensor setting also impacts Parking Mode feature based on your setting selection.
Page 44
USER MANUAL LIVE SPEED This option allow you to utilize the live speed view on the LCD. • • ON (Default) DISTORTION CORRECTION Because of the circular wide-angle lens of the dash cameras to capture the details on wide side, some distortion in the image is created.
PHOTO SETTINGS To Enter Photo Se�ng Press & Hold "M"button to enter Photo Mode. Press " button ONCE to enter Photo Settings. Press "D" button to access photo settings. Now use " " "D" buttons to scroll through > then press "0K"...
Page 46
USER MANUAL 3F/SECOND BURST MODE This feature allows you to take burst capture of 3-Frames/Sec with single press of a button. • • ON (Default) IMAGE QUALITY This feature allows you to set the quality level of an image captured. Higher the image quality more space it will take on the memory card.
Page 47
PHOTO EFFECT This feature allows you to choose color effect for captured image. • Color (Default) • Black & White • Sepia This feature allows you to set the camera’s sensitivity to light when taking photos. The higher the setting value the greater the sensitivity. •...
USER MANUAL PLAYBACK SETTINGS To Enter Playback Se�ng 1. Press & Hold "M" button two times to enter Playback Mode. 2. Press "M" button ONCE to enter Play Settings. 3. Press "D" button to access Play settings. 4. Now use "U"...
SYSTEM SETTINGS WIFI This feature will allow you to turn WiFi broadcast ON from the camera so you can connect your phone with ROVE R2-4K Dash Cam to access videos, photos and settings. WiFi Name SSID ROVE R2-4K-********* Password 1 2 3 4 5 6 7 8 You can also turn WiFi ON by pressing &...
Page 50
USER MANUAL CLOCK FORMAT This feature allows you to choose the clock time format to 12 or 24 hours. • 12-Hours • 24-Hours TIME ZONE SETTING Here you can choose your desired or local time zone setting based on UTC/ GMT value. Please make sure to adjust time zone setting during standard vs.
Page 51
BEEP SOUND This feature allows you to turn ON/OFF camera button’s beep sound & any voice confirmation. • ON (Default) • SPEAKER VOLUME This feature allows you to set the volume level for the buttons beep volume, playback video volume, boot up chime volume through camera's internal built-in speaker.
Page 52
USER MANUAL LANGUAGE This setting allows you to choose your language setting for camera’s firmware. English (Default) French Spanish Portuguese Deutsch Italian Simplified Chinese Traditional Chinese Russian Japanese Thai Polish TV MODE Here you can choose your TV mode based on your country’s TV setting.
Page 53
LICENSE PLATE This feature will allow you to insert custom vehicle ID or Driver ID to be stamped on video. • UP /D button to select desired character. • To add more characters' press "M"button to switch to next character. When Done press button to confirm &...
Page 54
We recommended that you do NOT use longer delay shut down, as this will use the internal battery more, hence it will affect the battery's life. We recommend that you use ROVE's 3-Lead hard Wire Kit for better results to utilise the 24-HR Auto Trigger Parking Mode instead.
Page 55
Here you can check the current firmware version installed on your camera. You will need this information in the future to check if newer version of firmware is available. Please visit: www.rovedashcam.com For latest firmware upgrade instructions. ROVE-R2-4K-06102017 (First - Original Firmware) •...
USER MANUAL RESETTING THE CAMERA Resetting Hardware & Software are two different things. 1. Reset The Hardware/Camera: Press the RESET Button at the bottom of the camera once. If the camera is freezing or stuck where no buttons will respond, then please press the RESET button only ONCE at the bottom of the camera with a paper clip or tip of the pen while it is turned ON.
BATTERY INFORMATION This Product contains Lithium-ion inbuilt battery. With a full charge battery should last upto 2-5 minutes. Internal battery is NOT meant to last long time. The higher the video resolution you choose the more power it will consume, hence it will last short duration, and the lower video resolution you choose the less power it will consume, hence it will last longer.
Page 58
USER MANUAL CAUTION If you leave your car for long time we advise that you remove • the camera from the car because the temperature inside the car can exceed specified range above depending upon your geographical and weather conditions. Do not expose this camera to extreme high heat, direct •...
GPS player Software Installation (PC/MAC Only) (Only suitable for the units with GPS function) To download FREE GPS Player, visit www.rovedashcam.com Why GPS Player? What are the features? Check G-Sensor Data Play back your recorded videos To see the Exact GPS route with the video on google maps Check Driving Speed Check Driving Direction (i.e.
Page 60
USER MANUAL Date & Time Shows Date & Time of video was recorded Past Viewed Files These are you previously viewed files. Click on to view them again. Driving Speed This is where your driving speed will be displayed. Playback Controls •...
ONE YEAR LIMITED WARRANTY We at would like to provide One (1) full year of limited warranty for your product from the date of purchase to be free from defects in materials and craftsmanship. IMPORTANT: Please save your warranty/serial number card as an evidence.
Page 62
USER MANUAL lieu of repairs will be calculated based on company's prevailing depreciation rules and the same will be binding on the purchaser. The replacement unit will be either new or refurbished based on the availability. We reserve the right to even upgrade you to the newest version be it similar or not if we have discontinued the current model.
Dash Cam must be placed at proper location so it does not obstruct your view while driving. • Do not use or manipulate any functions or any accessories of ROVE Dash- Cam while driving. Distraction is a leading cause of accidents.
Please trust us. We have sold thousands of ROVE Dash Camera’s and they do NOT lag, we stand by our prduct and we do extensive tes�ng.
Page 65
If s�ll having issue, please reach out to customer care. My oldest video files are missing Your ROVE Dash Cam has Loop Cycle Recording. When it is set to either 1, 3, 5 or 10-mins, it will delete oldest files and record newer files over and over when the memory card is full.
Page 66
USER MANUAL Camera showing "Memory Error" or "Please Insert Micro SD Card" even though memory card is already installed into the camera. Please make sure memory card is at least Class 10, U3 and purchased from trusted vendor such as Walmart, target, best buy, Ship & Sold by Amazon" etc. (there are many fake cards out there Online, remember if it's cheap, its fake.) Now go to camera's system se�ngs and FORMAT your memory card.
A BIG THANK YOU!! Thank you for purchasing your new Dash Cam. We hope you find your new dash cam useful and fun to use. If you are having difficulties setting it up, please email us at help@rovedashcam.com. 99% of all setup problems can easily be resolved and should be able to get you up and running in no time.
QUESTIONS QUESTIONS QUESTIONS CUSTOMER SERVICE: Response in just 6 hours For faster response text us help@rovedashcam.com 1 (401) 484-ROVE(7683) HOURS Mon - Fri 9am-5pm PST Scan the QR Code to CONTACT US Scan to Text US: Scan to Email US: 1-401-484-7683 help@rovedashcam.com...
Need help?
Do you have a question about the R2-4K and is the answer not in the manual?
Questions and answers
How to set time zone for New York
To set the time zone for the ROVE R2-4K in New York, follow these steps:
1. Go to System Settings > Date/Time.
2. Choose either manual time zone setup or GMT setup based on GPS signal.
3. If setting manually, select Eastern Time Zone (GMT -5:00) when Daylight Savings Time is not active (November - March) or GMT -4:00 during Daylight Savings Time (March - November).
4. If using GPS-based time, the camera will automatically adjust once it locks onto the GPS signal.
This will ensure the correct time zone for New York.
This answer is automatically generated