ROVE A12-60 Quick Start Manual

UNDERSTANDING BUTTONS:
MODE Button:
• Rove A12-60 has 3-different modes.
(1) video mode (2) photo mode (3) playback mode
• To switch between these three modes, first, if video is being
recorded, press OK button to STOP video recording before
you can switch between any of these modes. Then press MODE button
to switch through these three modes.
• While you are in any mode's menu settings,
press MODE button once to switch
between MODE settings
& SYSTEM settings.
MENU Button
• Press to ENTER / EXIT menu
of each specific mode.
• Each mode has their own
menu settings.
System settings
are common between
all three modes.
EMERGENCY Video Lock Button:
• Press once while video is being recorded
to manually lock current video so it does not
get deleted by loop cycle function.
• The protected video will be saved
under EVENT folder when you connect your
camera to PC, or enter Micro SD card to PC.
OUT OF THE BOX INSTRUCTIONS:
(please read and understand warnings & safety instructions in user manual first before operating)
1. Please charge your ROVE A12-60 for at least 6 hours before you use it to
prevent any errors.
2. Rove A12-60 is designed to turn ON and start recording video
automatically when it receives power and STOP recording within few
seconds when it stops receiving power. i.e. When you start/stop your car
3. Please insert Class 10 or higher Micro SD Card
4. How to transfer videos to your PC:
a. Connect Rove A12-60 to your PC with provided mini-USB data cable
to view video files directly on to your PC. Go to my computer, it works
just like when you connect pen-drive to your computer.
b. Remove micro SD card from Rove A12-60, then insert it to provided
SD adapter and then insert into SD card slot into your PC.
5. Download ROVE Video Player to your PC: See page 31 on user manual for
detailed instructions.
6. How to hide power cable inside your car's dashboard?
There are many people has demonstrated on You-Tube how and where
to hide power cable inside car. You can view one of the ways here, this
video is not recorded by us.
http://www.youtube.com/watch?v=xwD8Ilk-MHU
If you still have problems setting it up, please visit our website for video tutorial explained by our
staff. http://www.rovedashcam.com
You can also email us at help@rovedashcam.com. We reply to our most emails within 12 hours and
all emails within 24 hours. NO EXCEPTIONS
You can also find our phone support information by visiting our website.
We love our returned customer. If you would like to order more of ROVE A12-60 Dash Cam then
please contact us for returned customer discount code.
If you have any suggestions, please feel free to write us an email or contact us. We always want to
make improvements to our next product so we can have better and easy lifestyle. Together we can
make a difference.
Thank you with Best Regards!!
Customer Care: Andy
WINDSHIELD MOUNT INSTRUCTIONS.
Lock Position
Unock Position
• Plug this cable into
GPS Input slot
HOW TO CORRECTLY INSERT MICRO SD MEMORY CARD?
WRONG:
If memory card is crooked then do NOT
force insert it. Recheck correct way of
inserting before proceeding again.
POWER / PHOTO Button
• Press once to turn ON camera
• Press & Hold to turn OFF camera
• Press once while video is being
recorded to take a snap shot
UP Button:
• Press once to
MUTE / UN-MUTE Microphone
• Press to scroll UP while
in any settings menu
DOWN Button:
• Press once to turn OFF / ON LCD
(note camera still stays ON)
• Press to scroll DOWN while
in any settings menu.
OK Button:
• Press once to START / STOP
video recording while
in video mode.
• Press once to take a snap
shot while in photo mode.
• Press once to play video after
selecting desired video in
playback mode.
• Press to enter / confirm specific
setting while in menu or
system settings.
• GPS Geo-tagging Device
• Turn this locking knob clock wise
while applying pressure towards
windshield to create
strong suction.
• Here attach Rove A12-60 camera
to this windshield mount's latch
• Insert Micro SD card as shown here
CORRECT:
Make sure memory card is straight
half way in, then Push in until it clicks.
To remove, gently push inwards until clicks
and pops out then pull it out of the slot.