Lenze AC Tech MotionView OnBoard PositionServo ETHERNET/IP Reference Manual page 40

7.3 Assembly Object
An Assembly Object is the "assembly" or mapping of data from different instances of various classes into a
single attribute. With assembly mapping, the I/O data is produced in one block. An assembly object can be used
to configure a device using one block of data instead of setting the individual device parameters.
7.4 TCP/IP Interface Object
The TCP/IP Interface object is the connection object that allows for I/O and Explicit messages to be sent from
the device on the network to the other devices.
P94ETH01D
Acyclic Data Access
Class Code
Class Attributes:
Class Services:
Instances:
Instance Attributes
Instance Services
Class Code
Class Attributes:
Class Services:
Instance Attributes
Instance Services
Revision
Max Instance
Get_Attribute_Single()
Refer to Table 14
Get_Attribute_All
Get_Attribute_Single
0xF5
Revision 1
Max Instance
Number Instance
Get_Attribute_All
Get_Attribute_Single
Status
Configuration Capability 6
Configuration Control
Physical Link -> Path 0x20 0xF6 0x24 0x01
Interface Configuration
Host Name
TTL
Mcast Config
Get_Attribute_Single
Set_Attribute_Single
36
0x04
2
3