Advertisement
About These Instructions
This documentation applies to EtherNet/IP communications for the PositionServo drive and should be used
in conjunction with the PositionServo User Manual (S94H201) that shipped with the drive. These documents
should be read in their entirety as they contain important technical data and describe the installation and
operation of the drive.
Copyright ©2008 by Lenze AC Tech Corporation.
All rights reserved. No part of this manual may be reproduced or transmitted in any form without written
permission from Lenze AC Tech Corporation. The information and technical data in this manual are subject to
change without notice. Lenze AC Tech makes no warranty of any kind with respect to this material, including,
but not limited to, the implied warranties of its merchantability and fitness for a given purpose. Lenze AC Tech
assumes no responsibility for any errors that may appear in this manual and makes no commitment to update
or to keep current the information in this manual.
MotionView ® , PositionServo ® , and all related indicia are trademarks of Lenze AG in the United States and
other countries.
CompoNet™, DeviceNet™, CIP™, CIP Safety™, CIP Sync™, CIP Motion™, DeviceNet Safety™ and EtherNet/
IP Safety™ and all related indicia are trademarks of the ODVA (Open DeviceNet Vendors Association). EtherNet/
IP™ is a trademark used under license by ODVA.
RSLogix™, RSLogix™ 5000, CompactLogix, CompactLogix 5000, ControlLogix ® , MicroLogix™, SoftLogix,
Allen Bradley ® and all related indicia are trademarks of Rockwell Automation ® Corporation.
Advertisement
Need help?
Do you have a question about the AC Tech MotionView OnBoard PositionServo ETHERNET/IP and is the answer not in the manual?
Questions and answers