Configure The At-Gpib/Tnt Input/Output Range; Figure 2-5. At-Gpib/Tnt Parts Locator Diagram - National Instruments AT-GPIB/TNT Getting Started

1
1 Product Name,
Revision Letter, and
Assembly Letter
© National Instruments Corporation
®
4 5
2 Base I/O Address
3 Serial Number

Figure 2-5. AT-GPIB/TNT Parts Locator Diagram

Configure the AT-GPIB/TNT Input/Output Range

An I/O range is a segment of address space reserved for the input and
output of a board. The base I/O address of an Input/Output Range is the
first position in the Input/Output Range used by the plug-in interface
board. By default, the AT-GPIB/TNT is configured to use base I/O
address 2C0 hex. With this setting, the board uses an Input/Output
Range of 2C0 hex to 2DF hex.
Chapter 2
2
4 DMA Channel
5 Interrupt Request
Jumper
2-7
Installation and Configuration
3
6
6 Shield Ground
AT-GPIB/TNT for Windows 98/95