Mmwave Ota Validation Anechoic Chamber Interior; Getting Started - National Instruments mmWave User Manual

mmWave OTA Validation Anechoic Chamber Interior

1. Arch
2. Measurement Antenna Fixture
3. Positioner
Note
Although the arch can hold multiple antennas to support multi-antenna
positions at equidistant places from the DUT center of rotation, it holds only one
antenna for the mmWave OTA Validation Test Reference Architecture.
Related Information
Internal Connections

Getting Started

Refer to the topics in this section to get started using the mmWave OTA Validation Test
Reference Architecture. Complete the tasks in the following table in sequential order to ensure
your system is ready for use.
8 | ni.com | mmWave OTA Validation Test Reference Architecture
1
3
on page 13
2