Engine
Removal
1. Remove Pinion Assembly/Rotor/Field/Pinion/
Clutch, Clamp and Clutch Housing,as instructed
in Manual 309890.
2. Fig. 4. Disconnect all necessary wiring.
3. Fig. 5. Remove two locknuts (72) and screws (131)
from base of engine.
4. Lift engine carefully and place on work bench.
NOTE: All service to the engine must be performed by
an authorized HONDA dealer.
WR 7ULJJHU'LVWDQFH VHQVRU
3UHVVXUH &RQWURO
*DOORQ &RXQWHU &DEOH
&OXWFK )LHOG &DEOH
F
. 4
IG
309414N
%RWWRP 9LHZ
WLD
F
. 5
IG
Installation
1. Lift engine carefully and place on cart.
2. Fig. 5. Install two screws (131) in base of engine
and secure with locknuts (72). Torque to 200 in-lb
(22.6 NSm).
3. Fig. 4. Connect all necessary wiring.
4. Install Pinion Assembly/Rotor/Field/Pinion/
Clutch, Clamp and Clutch Housing, as instructed
in Manual 309890.
Engine
131
72
D
15