Step 2; Mount The Pwrview - Generac Power Systems PWRview Welcome Manual

Step 2

MO U NT T H E P WRV I E W
Find an empty space in the panel where PWRview
can comfortably fit. Secure the mounting plate to
your panel. Ensure that there is enough room for
the wiring to reach PWRview once it's clipped into
place, but do NOT clip it into place yet.
O F F O F F
O F F
NOTE: The self-
drilling screws will
need pressure to drill
through the metal. You
can also drill a pilot
hole to make it easier.
Just be sure you use a
1/8" or smaller drill bit.