Step 1; Remove The Panel Cover - Generac Power Systems PWRview Welcome Manual

Step 1

RE M OVE PAN EL C OV E R
Turn off the main breaker. Remove the screws on the corners
of the panel, then remove the cover. After opening the panel,
you should see the wires going into each breaker and main
lines from the utility.
O F F O F F
O F F
!
DAN G ER :
Electrocution.
Even with the
main breaker in
the 'OFF' position
the potential for
energized wires
exists. The main
utility lines and
connections will
be exposed and
energized.