Yamaha CP5 Reference Manual page 38

On-screen name
Page
(and full name)
2 Mode
Meas (Measure)
3 Tempo
Beat
Click
4 RecCount
Undo
38 CP5/CP50 Reference Manual
Description
This parameter is used to select a recording mode. It is not available, however,
when Rec has been set to "Wave".
Setting values: replace or overdub
replace
Any data contained within the User Song selected for recording will be overwritten
with your new performance data.
overdub
Your new performance data will be added to any data contained within the User Song
selected for recording.
This parameter is used to select the start point for recording. It is not available,
however, when Rec has been set to "Wave".
Setting values: 001 to 999
NOTE
If you have selected a User Song already containing data for recording, the
Meas parameter can be set to any measure up to the last one containing
data.
This parameter is used to select the playback tempo for the backing track and
metronome. When Rec has been set to "Song", this tempo will be used for play-
back after recording. The tempo can also be adjusted using the Tempo param-
eter from the Song Setting screen (page 35).
Setting values: 30 to 300
NOTE
To synchronize the backing-track tempo with that of an external MIDI device
or DAW application, set the MIDISyn parameter (page 46) from Page 6 of
the Utility screen to "ext" or "auto". When "ext" is selected or when "auto" is
selected and MIDI Clock messages are being received from an external
source, the tempo will be displayed as "ext" and modification will not be
possible.
This parameter is used to set a time signature for the backing track and metro-
nome. The time signature can also be adjusted using the Beat parameter from
the Song Setting screen (page 35).
Setting values: 1/4 to 16/4, 1/8 to 16/8, 1/16 to 16/16
This parameter is used to turn the metronome on and off. The same setting can
be made using the Click parameter from Page 7 of the Utility screen.
Setting values: on or off
This parameter is used to turn count-in at the start of recording on or off. The
same setting can be made using the RecCnt parameter from Page 7 of the Util-
ity screen.
Setting values: on or off
This parameter becomes available whenever recordings have been made, and
it allows you to undo the most recent. When you press Knob 3 to undo a record-
ing, you will be asked to confirm that you wish to proceed. To do so, press
either Knob 1 (YES [PUSH]) or the [ENTER] button. To cancel the undo process,
press either Knob 3 (NO [PUSH]) or the [EXIT] button. It should be noted that
this parameter will not become available when Rec has been set to "Wave".
Internal Design of the CP5 & CP50
Reference
Left & Right Parts
R [VOICE]
R
[PRE-AMP]
R [MOD-FX]
R [PWR-AMP] (CP5 only)
R [LEFT1]/[LEFT2]/[RIGHT1]/
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
R [COMMON]
Song Setting Area
R
[SONG SETTING]
[RECORD]
R
TRACK Part
R [TRACK]
MIC INPUT Part
[MIC INPUT] (CP5 only)
R
Settings for All Parts
R [REVERB]
Settings for All Performances
[MASTER COMPRESSOR]
R
R [UTILITY]
R [FILE]
Appendix