Yamaha CP5 Reference Manual page 25

Power-Amplifier / Compressor Block (CP5 only)
Using the Power-Amplifier / Compressor block, you can choose either a faithful recreation of one of
many power amplifiers used with electric pianos or a compressor to further enhance the sound cre-
ated by the currently-selected part's Voice and Modulation Effect blocks. This block is available on
the CP5 only.
Selecting Power-Amplifier / Compressor Block Types
Press and hold the [PWR-AMP] button (for at least one second)
Edit Sequence
using the [
The following table identifies and describes the different power amplifier / compressor types avail-
able within the Power-Amplifier / Compressor block. If you have selected a voice from the PIANO or
E.PIANO category for the current part, this block's selection page will give priority to power amplifi-
ers and a compressor specially designed for piano voices. Furthermore, a range of general-pur-
pose effects can also be selected from the block's Other group. Meanwhile, if you have selected a
non-piano voice, the power amplifiers, the compressor, and all other effects will be available for
selection as insertion effects.
For PIANO and E.PIANO voices:
Selected power-amplifier / compressor type
On-screen name
(and full name)
71Rd I (PowerAmp 71Rd I)
73Rd I (PowerAmp 73Rd I)
75Rd I (PowerAmp 75Rd I)
78Rd II (PowerAmp 78Rd II)
69Wr (PowerAmp 69Wr)
77Wr (Power Amp 77Wr)
Clean (Clean Amp)
Comp376 (Compressor 376)
Other
25 CP5/CP50 Reference Manual

PAGE] button if necessary
L
PwrAmpType
71Rd I
PowerAmp 71Rd I is ideal for enhancing the acoustic nuances of electric pianos.
Also intended for use with electric pianos, the 73Rd I power-amp/speaker combi-
nation produces a more spacious tone.
PowerAmp 75Rd I is an electric-piano power amplifier that realizes a powerful, all-
engulfing tone.
Particularly well suited to chorus-type effects, the 78Rd II power-amp/speaker
combination is characterized by a clear, highly-present tone.
The 69Wr power amplifier enhances low-end punch while enriching the overall
electric-piano sound.
A higher degree of presence can be added to electric piano voices using the
77Wr power amplifier.
Modeling an ideal power amplifier, Clean Amp boosts sounds evenly across the
entire frequency spectrum.
Compressor 376 is a vintage-type compressor that can be used to control the
dynamics of your piano sounds.
The Other group contains general-purpose effects that are suitable for use with
voices other than those from the PIANO and E.PIANO categories. Within this
group, you can select from a wide range of effects in a number of different catego-
ries. These categories and effects are identical to those from the Modulation Effect
block, and more details can be obtained from the table on page 16.
 Navigate to Page 1
Turn Knobs 1 to 3
Description
Internal Design of the CP5 & CP50
Reference
Left & Right Parts
R [VOICE]
R
[PRE-AMP]
R [MOD-FX]
R [PWR-AMP] (CP5 only)
R [LEFT1]/[LEFT2]/[RIGHT1]/
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
R [COMMON]
Song Setting Area
R
[SONG SETTING]
[RECORD]
R
TRACK Part
R [TRACK]
MIC INPUT Part
[MIC INPUT] (CP5 only)
R
E
Settings for All Parts
R [REVERB]
Settings for All Performances
[MASTER COMPRESSOR]
R
R [UTILITY]
R [FILE]
Appendix