Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Petzl C47A
Summary of Contents for Petzl C47A
- Page 1 Tips for protecting your equipment Ascenders...
- Page 2 • In general, take care of your safety gear. Do not leave it lying about anywhere. Do not throw your gear on the ground. • Read the specific recommendations for each product in the Instructions For Use available on the Petzl Web site.
- Page 3 For long-distance travel, beware of moisture in containers during transit, in ports or airports, especially in salty environments. Repair Modifications and repair of Petzl products outside of Petzl facilities is prohibited, except for replacing worn parts with replacement parts referenced in Petzl catalogs. See the list of replacement parts at petzl.com In case of doubt, contact After-sales service (aftersales@petzl.fr)
- Page 4 Metal equipment Identification Petzl metal products are marked with a laser engraving, a label, or a stamp indicating the model name, standards references and the serial number for traceability. Usage tips If you want to personalize your metal gear: •...
- Page 5 You can use adhesive tape on the areas where the rope does not run. Maintenance • After use in a salty environment (seaside), rinse with fresh water. • Use a small brush to remove oily dirt or mud. • Wash your gear in lukewarm soapy water (ph neutral, 30 °C maximum), then rinse thoroughly with fresh tap water. •...
- Page 6 Ascenders Maintenance Use a small brush to remove mud. For proper function and good grip on the rope, the teeth must be clean.
Need help?
Do you have a question about the C47A and is the answer not in the manual?
Questions and answers