Starting-Up; Pan Detection; Residual Heat Indication; Booster And Double Booster Function - Belling Design BDC95IN2F Instruction Manual

Starting-up

•
Start up / switch off the hob:
Action
To start
To stop
•
Start up / switch off a heating zone:
Action
To set
(adjust the power)
To stop
If no action is made within 20 second the electronics returns to waiting position.

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot
and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster and Double Booster function

Booster [ P ] and Double Booster [
If this function is activated the heating zones run for 10 minutes with an ultra-high power.
Booster power is ideal for example to heat up rapidly, big quantities of water.
•
Start up / Stop the Booster:
Action
Start up the Booster
Stop the Booster
Control panel
press key [ ] for 2 sec.
press key [ ] for 2 sec.
Control panel
slide on the "SLIDER"
to the right or to the left
slide to [ 0 ] on "SLIDER"
] boosts the Power to the selected heating zone.
Control panel
Slide to the end of the "SLID
Or press directly on the end of
the "SLIDER"
Slide on the "SLIDER"
11
Display
[ 0 ]
nothing or [ H ]
Display
[ 1 ] to [ P ]
[ 0 ] or [ H ]
Display
ER" [ P ]
[ 9 ] to [ 0 ]