Commissioning; Connection To The Telephone Line - Telecom Behnke 10 Series Instructions Manual

Hide thumbs Also See for 10 Series:

Table of Contents

Available languages

Instructions for Series 10

Commissioning

commissioning

For commissioning, please connect your

Behnke Series 10 Intercom station to an

analogue landline or to an analogue extension

of a telephone system. To do so, please

connect the two-core telephone line to the

Behnke Intercom using the designated screw

terminals.

You may also connect an additional 15 V

Telephone

potential-free DC power supply via the

connection

designated jack. This additional power

supply is necessary to illuminate the device,

to record and play voice messages and to

activate the external amplifier.

After connecting the telephone line, the

Behnke Series 10 device will produce a tone

for several seconds indicating initialisation.

During this time, the line is busy.

Connection to the telephone line

www.behnke-online.com

Table of Contents

Table of Contents

Do you have a question about the 10 Series and is the answer not in the manual?