Pre-Programming Selections (For Singing Karaoke) - Yamaha VCD-120K Owner's Manual

PRE-PROGRAMMING SELECTIONS
9
KEY CONTROL
2
KARAOKE
PROG CANCEL
3
5
1
6
DIGEST
TIME INDEX
INDEX
SLOW PAUSE
1
Load discs on the disc tray.
2
Press the KARAOKE button so that "KARAOKE" lights
up on the display. To cancel it, press the KARAOKE
button once again.
KARAOKE
3
PROG
4
Select the disc (before "DISC" and "MUSIC" stop
flashing on the display).
DISC SKIP
5
Select the track (before "DISC" and "MUSIC" stop
flashing on the display).
1 2
6 7
(FOR SINGING KARAOKE)
OPEN/CLOSE
9
MPX
ON SCREEN
6
ENTER S/F REP
+10
2 3 4 5
7 8 9 0
4
INTRO DISC SKIP
SEARCH
PREV SKIP NEXT
7
STOP PLAY/REPEAT
RETURN SELECT
KARAOKE
Flashes.
DISC MUSIC L R
+10
3 4 5
8 9 0
Programming is possible either while the unit is playing a
disc or stopped.
As many as 10 selections can be stored at one time.
DISC SKIP SKIP/SEARCH ECHO LEVEL
PREV NEXT
7 8 9 0
MIN MAX MIN MAX
9
6
7
To start play, press the PLAY/REPEAT button.
PLAY/REPEAT
* This unit pauses whenever a play of track ends. To start
playing the next track, press the PLAY/REPEAT button.
8
Repeat step 3–6 to program more selections.
9
If necessary, change the audio output mode by pressing
the MPX button.
Use the KEY CONTROL buttons and the LEVEL and
ECHO controls as you prefer. (See page 14 for details.)
Notes
In step 4 or 5, if "DISC" and "MUSIC" stop flashing on the
display before you finish programming a track, press the
PROG button again.
If you program a track number which is higher than the
highest track number on the disc, "E rr" appears on the
display and it cannot be programmed.
This unit can store as many as 10 selections at one time. If
you program a track number as the eleventh program, the
tenth program is replaced with it.
PLAY/SELECT OPEN/CLOSE
STOP/RETURN PLAYXCHANGE
MIC 1 MIC 2
KEY CONTROL
ENTER
SELECT
15