Connections - Yamaha VCD-120K Owner's Manual

Before making any connections, switch OFF the power to
this unit, the amplifier, the video monitor, etc.
Connections should be made to the correct input terminals
of the amplifier, the video monitor, etc.
LINE OUT VIDEO OUT
L
R
PAL
Audio connection
cord (included)
Connecting to the amplifier
Connect the LINE OUT terminals to the audio input terminals of
the amplifier (marked as "CD", "AUX", etc.) by using the
included audio connection cord.
Be sure that the left ("L") and right ("R") LINE OUT terminals
are connected to the corresponding (left and right) terminals of
the amplifier.
4

CONNECTIONS

VIDEO IN
Video connection cord (included)
MODE
SELECT
AUTO
NTSC
CD
If the placement of this unit causes interference to other
equipment, separate them from each other.
Video monitor
Connecting to the video monitor
Connect this unit's VIDEO OUT terminal to the video input
terminal of the video monitor by using the included video
connection cord.
This unit
(General model)
VOLTAGE SELECTOR
240V
To AC outlet
Amplifier