Yamaha VCD-120K Owner's Manual page 17

To cancel a programmed selection
1
The disc number and the track number of the last
selection will flash on the display.
2
PREV
Display the disc number and the track number to be
canceled.
3
Press once while the number is flashing.
Notes
The SEARCH buttons can be used during play to search all
tracks including tracks not programmed.
KEY CONTROL
KARAOKE
1
PROG
1
6
DIGEST
TIME INDEX
INDEX
SLOW
CANCEL
SKIP NEXT
ENTER
OPEN/CLOSE
MPX
ON SCREEN
3
CANCEL ENTER S/F REP
+10
2 3 4 5
7 8 9 0
INTRO DISC SKIP
SEARCH
2
PREV SKIP NEXT
PAUSE STOP PLAY/REPEAT
RETURN SELECT
To cancel the selection you are currently
programming
There are two methods, as described below.
1) Press the CANCEL button instead of the ENTER button
after the track number is selected.
2) If about 30 seconds pass with no operation after the track
number is selected, the track will not be programmed.
To cancel all program data
Switch off the power.
When programs consist of tracks from more than one disc, if
you change a disc by using the PLAYXCHANGE button, the
programmed track on the removed disc is replaced by the
same numbered track on the new disc.
If the same number of the programmed track does not exist
on the new disc, the program will substitute the highest-
numbered track on the new disc.
EXAMPLE:
Program
Disc 1, Track 5
Disc 2, Track 8
Disc 4, Track 12
Swap disc 4 (new disc has 9 tracks only)
Disc 1, Track 5
Disc 2, Track 8
Disc 4, Track 9
17