Yamaha VCD-120K Owner's Manual page 14

KEY KEY CONTROL
CONTROL
KARAOKE
PROG CANCEL
1
6
Adjusting the level of sound signals
input from the microphone(s)
MIN
Turning the LEVEL control clockwise increases the level, and
counterclockwise decreases the level.
Changing audio output mode
You can select any of four audio output modes by pressing the
MPX button.
Display
indication
Normal stereo output
L R
Sound from the left channel only is
output from both the left and right
L
speakers.
Sound from the right channel only is
R output from both the left and right
speakers.
Sound of vocals on the source is
attenuated.
VC Note: There may be a case that
vocals cannot be attenuated
effectively according to a source.
In this mode, if a microphone is
connected to this unit, the "VC"
indication blinks. When you sing to
the microphone, vocal sound on the
source is attenuated. When the
microphone does not sense your
vocal, vocal sound on the source is
output.
14
Adjustments for enjoying Karaoke
OPEN/CLOSE
MPX
ON SCREEN
ENTER S/F REP
+10
2 3 4 5
7 8 9 0
LEVEL
MAX
MPX
Audio output mode
MPX
MPX KARAOKE
+10
MPX
Turning the ECHO control clockwise increases the level, and
counterclockwise decreases the level.
If you need no echo effect, set this control to the "MIN"
position.
Pressing the KEY CONTROL buttons change key of the track
currently playing. The current key level is shown on the
display. Whenever a track changes, its original key level is
restored.
: Whenever pressed, key of the track becomes lower in 6
: Pressing this button restores the original key level of
: Whenever pressed, key of the track becomes higher in
KEY CONTROL DISC SKIP SKIP/SEARCH
PREV NEXT
1 2 3 4 5 6 7 8 9 0
KEY CONTROL ECHO
Adjusting the level of echo
applied to sound signals
input from the microphone(s)
ECHO
MIN
Adjusting key of the track
currently playing
KEY CONTROL
steps.
the track.
6 steps.
PLAY/SELECT OPEN/CLOSE
STOP/RETURN PLAYXCHANGE
ECHO LEVEL MIC 1 MIC 2
KEY CONTROL
MIN MAX MIN MAX
LEVEL
MAX