Switching The Time Display - Yamaha EMX-120CD Owner's Manual

COMPACT DISC PLAYER OPERATION
CD CHANGER RECEIVER EMX–120CD
PROGRAM
STANDBY/ON
ECHO MUSIC ECHO
KARAOKE MEMORY
PHONES
DISPLAY MEMORY AUTO/MAN'L
TIME ADJ TIMER
TIME
1
TRACK
CD TUNER
1 2 3 4 5
1 2 3 4 5
6 7 8 PRESET
2
6 7 8 9 0
A B C D E
+
TIME PROG I0
MODE REPEAT RANDOM OPEN/CLOSE
TRACK
DISC SKIP STOP PLAY/PAUSE
CD TUNER
INPUT
CENTER/REAR
TEST FLAT
/DELAY
ECHO
LEVEL KARAOKE MUSIC PROGRAM
STANDBY/ON
SLEEP DISPLAY 3
VOLUME
TRACK
4
TRACK
A/B/C/D/E PRESET/TUNING/BAND
DISC
OPEN/CLOSE CHANGE
DISC 1 DISC 2 DISC 3
VOLUME
INPUT SELECTOR
CD TUNER
VCR•LD/TV•CD•TAPE/MD•TUNER
MIC TONE MIC MIC MIXING
REPEAT TIME INPUT TRIM
HOUR MIN
NORMAL SOFT MIN MAX
TIME
REM
TOTAL
TOTAL REM

Switching the time display

Each time the TIME button is pressed, the display will
change as described below.
[Example]
When the second track is being played back (Refer to the
illustration on the left.)
The elapsed play time for the track now playing back will
be displayed.
* 8 seconds have passed since the beginning of the
second track.
The remaining play time for the current track will be
displayed.
* 2 minutes and 58 seconds remain till the end of the
second track.
The total play time of the disc will be displayed.
(If the unit is in the program play mode, the total play time
of the programmed tracks will be displayed.)
The total remaining play time from the point being played
at that time will be displayed.
* 41 minutes remain till the end of the disc.
Notes
● During random play, the total remaining play time on the
disc will not be displayed.
● The remaining play time will not be displayed for track
number 16 or higher.
If a program play is performed and the programs include a
track number 16 or higher, the total play time and the total
remaining play time will not be displayed, either.
E-25