Switching The Time Display - Yamaha EM-203VCD Owner's Manual

VIDEO CD PLAYER OPERATION
VIDEO CD CHANGER RECEIVER
VIDEO CD
Version 2.0 / Playback Control
PROGRAM
STANDBY/ON
ECHO MUSIC ECHO
KARAOKE
MEMORY
PHONES
DISPLAY MEMORY AUTO/MAN'L
TIME ADJ
TIME
1
TRACK
VCD/CD TUNER
1 2 3 4 5
1 2 3 4 5
6 7 8 PRESET
6 7 8 9 0
2
A B C D E
+
TIME PROG I0
MODE INDEX RANDOM OPEN/CLOSE
DISC SKIP PREV NEXT RETURN SELECT
TRACK
STOP PLAY/PAUSE
VCD/CD TUNER
INPUT
CENTER/REAR
TEST MUSIC TIME INDEX
/DELAY
ECHO/KEY
LEVEL PROGRAM INTRO DIGEST
STANDBY/ON
SLEEP KARAOKE
3
VOLUME
TRACK
4
TRACK
A/B/C/D/E
PRESET/TUNING/BAND
DISC
OPEN/CLOSE CHANGE
1 2 3
DISC DISC DISC
VOLUME
INPUT SELECTOR
VCD/CD TUNER
VCR•LD/TV•VCD/CD•TAPE/MD•TUNER
MIC TONE MIC MIC MIXING
REPEAT TIME INPUT TRIM
TIMER HOUR MIN
NORMAL SOFT MIN MAX
TIME
REM
TOTAL
TOTAL REM

Switching the time display

Each time the TIME button is pressed, the display will
change as described below.
[Example]
When the second track is being played back (Refer to the
illustration on the left.)
The elapsed play time for the track now playing back will
be displayed.
* 8 seconds have passed since the beginning of the
second track.
The remaining play time for the current track will be
displayed.
* 2 minutes and 58 seconds remain till the end of the
second track.
The total play time of the disc will be displayed.
(If the unit is in the program play mode, the total play time
of the programmed tracks will be displayed.)
The total remaining play time from the point being played
at that time will be displayed.
* 41 minutes remain till the end of the disc.
Notes
● During random play, the total remaining play time on the
disc will not be displayed.
● The remaining play time will not be displayed for track
number 16 or higher.
If a program play is performed and the programs include a
track number 16 or higher, the total play time and the total
remaining play time will not be displayed, either.
● When this unit is in the Playback Control mode ("PBC" is
illuminated on the display), the currently selected time
display mode cannot be changed to another.
E-25