Yamaha EMX-120CD Owner's Manual page 43

USING SOUND FIELD PROCESSOR
CD
1 2
1 2
6 7
6 7
A B
TIME PROG
MODE
DISC SKIP
CD TUNER
CENTER/REAR
TEST
/DELAY
1
ECHO
LEVEL
STANDBY/ON
SLEEP
2
VOLUME
TUNER
3 4 5
3 4 5
8 PRESET
8 9 0
C D E
+
I0
REPEAT RANDOM OPEN/CLOSE
STOP PLAY/PAUSE
INPUT
FLAT
KARAOKE MUSIC PROGRAM
DISPLAY
Adjusting CENTER LEVEL
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in "Speaker
balance adjustment" on pages 16 to 17.
Control range : +10 to –20
1
Press the CENTER/REAR/DELAY selector button once or
more so that "CENT" appears on the display.
2
By continuously pressing the LEVEL control + or – button,
the level value changes continuously.
Notes
● This adjustment can be made only when the sound field
program PRO LOGIC or
● Once the output level is adjusted, the level value will be
the same in the
programs.
● If the center channel mode is in the "PHANTOM" position,
the sound output level of the center speaker cannot be
adjusted. This is because in this mode, the center sound
is automatically output from the left and right front
speakers.
Adjusting REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in "Speaker
balance adjustment" on pages 16 to 17.
Control range : +10 to –20
1
Press the CENTER/REAR/DELAY selector button once or
more so that "REAR" appears on the display.
2
By continuously pressing the LEVEL control + or – button,
the level value changes continuously.
Notes
● This adjustment can be made when a sound field program
except 3 STEREO is selected.
● Adjustment can be made to
ARENA, DISCO, STADIUM and MONO MOVIE
individually.
E-35
3 STEREO is selected.
PRO LOGIC and 3 STEREO
PRO LOGIC, HALL,