Table of Contents
Advertisement
User Guide
Notes
•
If on-line access to a parameter is not required, set the LMP using the
'User Parameters' list.
•
A full, valid list of user parameters must be given, even if a particular
parameter is not being used or is to be overwritten with cyclic data.
•
Ensure all parameters are within limits, as the LMP will reject any list
containing 'out of limit' parameters.
•
An explanation of time function processing is given in Section 5.0.
•
Ensure that the temperature dependent parameters are entered care-
fully, as these have no limits embedded in the relevant dialog boxes
e.g. Peak Picker Threshold, Alarm Temperature are within the IRT
range.
Current O/P Max. and Min. settings are within the IRT range and at
least 100° of span allowed.
•
Current O/P Parameters, IRT Type and Time Function
Select are only available as user parameters (i.e. not available as cyclic
data).
Landmark for Profibus
Page 13
Advertisement
Table of Contents
