Disabling The Daisy Chain Mode; Upgrading Smart Expansion Microphone - Konftel 800 User Manual

FEATURES AND ACCESSORIES
b) In
Daisy Chain Mode
The options are:
• . This is the default mode.
Master
•
Slave
c) Click .
Save
The slave unit displays the
Daisy Chain. This message remains for the period when the phone is in the
slave mode within the daisy chain arrangement.

Disabling the daisy chain mode

You can disable the Daisy Chain mode through the web interface or from the
phone.
Ensure that the phone displays the
• To disable the Daisy Chain mode from the web interface, do the following:
a) On the web interface, click
b) In
Daisy Chain Mode
c) Click .
Save
• To disable the Daisy Chain mode from the phone, do the following:
a) Touch the phone screen and enter the administrator password.
b) Tap
Phone > Daisy Chain
c) Select the
Master
d) Tap the icon three times to return to the home screen.
Application restarts and restores the Master status.

Upgrading Smart Expansion Microphone

You can upgrade the Smart Expansion Microphone when an update for the
microphone is available. If the update is available, the phone shows the following
message during boot after a factory reset or firmware upgrade: An update for
your Smart Microphone is available. See user manual.
Hold the
Microphone Muted
you connect the microphone cable, and keep holding the button for 5 seconds
after you inserted the cable.
When you release the button, it flashes red one time and then starts flashing
green to indicate that the upgrade process has started. The upgrade process
, select the required mode from the drop-down list.
Daisy Chain Mode
Daisy Chain
.
Basic
, select .
Master
.
mode.
button on the Smart Expansion Microphone while
49
icon and the following message:
icon.