Konftel 800 User Manual page 32

SETTINGS CONFIGURATION AND MANAGEMENT
Name
NTP Server
Date
Time
Description
To specify the NTP server when NTP is enabled. By default
the phone uses the following NTP server:
0.pool.ntp.org.
You can configure this parameter if you logged in with
the administrator password.
To set the current date.
You can use this function only through the web
interface.
You can set the current date manually only if NTP is in
disabled state.
The date is set in the mm/dd/yyyy format. You can specify
the date by doing the following:
• Manually enter the date in the field by clicking the day,
month, and year to change the value.
• Select a date from the date picker.
To set the current time.
You can use this function only through the web
interface.
You can set the time manually only if NTP is in disabled
state.
The time is set in the hh:mm:ss format. You can see the
time on the home screen of the phone.
The interface provides the time using the 12-hour clock
approach, that is you see an AM or PM abbreviation to
specify the time.
You can set the time by doing the following:
• Manually enter the time value in the field by clicking the
hours, minutes, and seconds to change the value.
• Select the time from the time picker.
32
Table continued...