Rear Panel - Yamaha CD REWRITABLE DRIVE CRW8824S Owner's Manual

The CRW8824S drive's rear panel features the following:
AUDIO OUT
R G L 1 2 4
AUDIO OUT AUDIO OUT
connector connector
Connect one end Connect one end
of the supplied 4- of the 4-pin audio
cable to this and pin audio cable
to this and the the other end to
other end to your your computer's
computer's sound sound card or
card or built-in built-in audio.
audio.
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
1
ID SELECT jumper switches
Set these switches using black plastic
shunts in order to manually assign a SCSI
ID number for the drive.
2
PARITY jumper switch
Set this switch using a black plastic shunt
in order to enable parity checking.
3
TERMINATOR jumper switch
Set this switch using a black plastic shunt
in order to enable the drive's built-in SCSI
termination.
4
BLOCK SIZE jumper switch
Set this switch using a black plastic shunt
in order to set the block size to 512 bytes
per sector.
7
SCSI connector SCSI connector
Insert the connector of the SCSI ribbon Insert the connector of the SCSI ribbon
cable here. Make sure you align the cable here. Make sure you align the
red line of the ribbon cable with pin 1 of red line of the ribbon cable with pin 1 of
the drive's connector, marked "SCSI the drive's connector, marked "SCSI
INTERFACE CONNECTOR 1." INTERFACE CONNECTOR 1."
SCSI
INTERFACE
CONNECTOR
+ 5V
1
DC INPUT
+ 12V
G
DC INPUT DC INPUT
connector connector
Insert the power Insert the power
connector from connector from
your computer's your computer's
power supply in power supply in
this socket to this socket to
feed power to the feed power to the
drive. drive.