Roborock H6M1A Instruction Manual page 17

Maintenance
Dustbin Installation Cleaning the Front Filter and
Multi-Cyclone Assembly
*Front Filter and Multi-Cyclone Assembly should be cleaned at least once a
month
�. Disconnect the vacuum from power before cleaning it, and avoid
squeezing the Power Trigger during cleaning.
�. Inspect and clean the Front Filter according to the manual regularly to
ensure optimum vacuum performance.
�. If cleaning fine dust or operating in MAX mode, the Front Filter may
require more frequent washing.
�. To clean the Front Filter and the Multi-Cyclone Assembly, remove the
Dustbin, then rotate the Multi-Cyclone Assembly counterclockwise and
remove it as shown. Then take out the Front Filter and rinse it with water.
Removing the Front Filter
andMulti-Cyclone Assembly
�. Remove the Dustbin as shown
Dustbin Removal Latch