STEINEL LiveLink HF 360 Manual page 10

Electrical installation / automatic mode
The wiring leads selected for in- ing both the mains voltage leads
stallation must comply with the and the control leads (e.g. NYM
regulations laid down in VDE 0100 5 × 1.5) may be used for the
(see Safety precautions, page 13). wiring between sensor and
For the wiring of the presence LiveLink Box. The lead between
detector, the following applies: sensor and LiveLink Box must
Under section 6 of VDE 0100 be no longer than 300 m (for
520, a multiple-core lead contain- 1.5 mm
Using several sensors
Several sensors can be connect- DALI users must not be exceed-
ed in a LiveLink system. In this ed (see Technical specifications
case, the maximum number of on page 17).
L N
Warranty Declaration
As purchaser, you are entitled to Making Claims
your statutory rights against the If you wish to make a claim, ple-
LiveLink
S
vendor. If these rights exist in
ase send your product complete
BOX
L DA
your country, they are neither and carriage paid with the origi-
N DA
curtailed nor restricted by our nal receipt of purchase, which
Warranty Declaration. We gua- must show the date of purchase
rantee that your STEINEL Profes- and product designation, either
sional sensor product will remain to your retailer or contact us at
in perfect condition and proper STEINEL (UK) Limited, 25 Ma-
working order for a period of nasty Road, Axis Park, Orton
5 years. We guarantee that this Southgate, Peterborough, PE2
product is free from material-, 6UP, for a returns number. For
manufacturing- and design flaws. this reason, we recommend that
In addition, we guarantee that you keep your receipt of
all electronic components and purchase in a safe place until the
DA
cables function in the proper warranty period expires. STEI-
L EVG DA
manner and that all materials NEL shall assume no liability for
N
used and their surfaces are the costs or risks involved in re-
without defects. turning a product.
switching on the LiveLink Box,
the sensor starts to flash once
per second during the initialisation
cycle.
IR Quattro HD LiveLink 40 s;
DUAL HF LiveLink 10 s;
HF 360 LiveLink 10 s
). After installing and
2
DALI
DALI
DA
For information on making claims
under the terms of the warranty,
please go to www.steinel-pro-
fessional.de/garantie
If you have a warranty claim or
would like to ask any question
DA
regarding your product, you are
DA
welcome to call us at any time
on our Service Hotline 01733
366700.
Sensor
- 16 -
DALI
Technical specifications
Dimensions IR Quattro HD LiveLink 120 × 120 × 70 mm
DUAL HF LiveLink
HF 360 LiveLink
Mounting height 3 m
Application inside buildings
Power consumption LiveLink BOX 6 mA 3-user IR Quattro HD LiveLink
12-22.5 V
16 mA 8-user DUAL HF LiveLink
7.4 mA 4-user HF 360 LiveLink 13 V
LiveLink output 1
DALI control line
(multi-master capability for communication with the LiveLink box)
Square detection zone IR Quattro HD LiveLink
Presence: max. 8 × 8 m (64 sq.m.)
Radial: max. 8 × 8 m (64 sq.m.)
Tangential: max. 20 × 20 m (400 sq.m.)
Detection zone DUAL HF LiveLink
20 × 3 m radial, 360° with 140° angle of aperture,
also through glass, wood and stud walls
Reach DUAL HF LiveLink
max. 10 x 3 m, in 3 directions, electronically and infinitely variable
HF 360 LiveLink
360° with 140° angle of aperture, also through glass,
wood and stud walls
Mounting height IR Quattro HD LiveLink 2.5 m - 10 m
ceiling mounting
DUAL HF LiveLink
HF 360 LiveLink
Sensor system IR Quattro HD LiveLink 13 detection levels, 4800 switching zones
DUAL HF LiveLink
HF 360 LiveLink
IP rating IP20
Temperature range -25°C to +50°C
120 × 120 × 75 mm
120 × 120 × 56 mm
, no SELV
2.5 - 3.5 m
2.5 - 3.5 m
5.8 GHz high frequency
5.8 GHz high frequency
- 17 -