IkaScope WS
Ultra portable oscilloscope
IkaScope WS
IkaScope WS
ports and interfaces are shown in the image below:
. Probe tip
. Ground lead connection
. Status LEDs and charging port
. Battery status LED
. Wifi status LED
. USB (micro-B) charging port
Principle of operation
How does it work?
IkaScope can be seen as a wireless oscilloscope probe, that displays measured signals and is configured
via remote screen (Tablet, smartphone or computer). Technically speaking, IkaScope WS
a full featured analog front end, a digital processing stage and a wifi module. First, measured signals are
conditioned, then converted to digital values via a high speed -bits ADC. Finally, a digital processing
stage streams the captured signal frames over a high speed wifi link.
(c) Ikalogic SAS
Interfaces
Figure : IkaScope WS
interfaces
WS
integrates