General - IKA LOGIC IkaScope WS200 Datasheet And User Manual

IkaScope WS Ultra portable oscilloscope
V/div
V/div

General

Input protection
Input to USB galvanic isolation
Built-in lithium battery
Communication interface
Operating, recharging and storage conditions
Charging method
Input isolation is defined according to measurements made on sample units taken from production batches. Do not exceed
± V between any measurement terminal and USB port.
The IKASCOPE should not be used during the battery charge in order to speed up the battery charge time.
(c) Ikalogic SAS
MHz
MHz
VAC during minute (production sample test)
never exceed V
VAC minute
(production sample test) never exceed
mAH
Wifi . b/g/n/e/i . GHz.
Access point or Station
°C to °C
< % HR non-condensing
Altitude < m
Micro USB port
WS
V