Table of Contents
Advertisement
IkaScope WS
• Never attempt to replace the battery yourself. Contact customer service in case your battery
needs replacement.
• Never recharge a device that shows signs of malfunctioning.
• Never recharge IkaScope WS
• Only use the USB cable provided by Ikalogic to recharge the device.
• Only connect the USB cable to a USB compliant port.
• Never recharge the device with a defective USB cable or charger.
• Do not store the device uncharged for long periods of time.
• Do not expose the device to temperatures beyond the range of
• Keep the device away from heat sources and direct sunlight.
• Do not subject device to impacts such as mechanical shocks or perforation.
• In case of accidental opening of the device, do not recharge or use the device and contact
customer support.
• Never short-circuit the battery.
• Never overcharge the battery.
• The battery contains dangerous chemical components, that can cause burns or explode. In case
of exposure to those chemical products, clean with water and get medical assistance immediately.
• Do not dispose of the battery as unsorted municipal waste.
• A failed battery pack should be disposed of in accordance with local regulations.
What's in the box
IkaScope WS
• Ground connection probe.
• Protective cap.
• USB charging cable.
Tampon encreur TRODAT 4928
• Quick start guide.
(empreinte 58 x 31mm)
Ordering information and customer support
For ordering information, please check for nearest distributor on www.ikalogic.com or contact us for
58 mm
any inquiry at contact@ikalogic.com.
76 rue des Grands Champs - 75020 PARIS
Tél. : +33 (0)1 85 08 70 69
Email : info@cynetis-embedded.com
Web : www.cynetis-embedded.com
(c) Ikalogic SAS
Ultra portable oscilloscope
is shipped with the following accessories:
for more than hours (disconnect the USB cable from USB port)
°C to
°C.
WS
Advertisement
Table of Contents
