Ikascope Ws200 Interfaces; Principle Of Operation; How Does It Work - IKA LOGIC IkaScope WS200 Datasheet And User Manual

IkaScope WS200 Ultra portable oscilloscope

IkaScope WS200 Interfaces

IkaScope WS200 ports and interfaces are shown in the image below:
1. Probe tip
2. Ground lead connection
3. Status LEDs and charging port
4. Battery status LED
5. Wifi status LED
6. USB (micro-B) charging port

Principle of operation

How does it work?

IkaScope can be seen as a wireless oscilloscope probe, that displays measured signals and is configured
via remote screen (Tablet, smartphone or computer). Technically speaking, IkaScope WS200 integrates
a full featured analog front end, a digital processing stage and a wifi module. First, measured signals are
conditioned, then converted to digital values via a high speed 8-bits ADC. Finally, a digital processing
stage streams the captured signal frames over a high speed wifi link.
(c) Ikalogic SAS 2019
Figure 3: IkaScope WS200 interfaces
WS200
9/21