Table of Contents
Advertisement
IkaScope WS
Ultra portable oscilloscope
WS
ProbeClick®technology
IkaScope incorporates an intelligent probe tip (called ProbeClick®) that detects when pressure is
applied. This allows important power saving since all power consuming circuitry is in stand-by when a
measurement is not in progress. That same intelligent probe tip is used to turn ON IkaScope, which
then turns OFF a er
minutes of non activity. During that period IkaScope keeps wifi connexion
active for optimal responsiveness when quick measurements need to be made.
Connectivity options
Since IkaScope is designed to be used in the o ice on the field, both Station and AP wifi modes are
supported. In other words, IkaScope may as well connect to your o ice or home Wifi network (when
configured to do so) or may create its own Wifi Access Point to which another display device may
connect.
Unpacking and first usage
IkaScope relies on a free application for display, analysis and configuration. You should first start by
downloading and installing it on your favorite platform. Check ikalogic.com website for latest download
link or search "ikascope" in the application store of your mobile device.
Turning ON IkaScope
A er unpacking a new IkaScope, turn it ON by pressing the probe tip on any rigid surface for more than
second. At the very first usage, IkaScope will not have any configured Wifi networks in its memory,
so it will automatically switch to AP (access point) mode. When IkaScope is correctly turned ON and
operating in AP mode, Wifi status LED should be blinking in white color.
In some situations, IkaScope battery may be fully discharged. If that's the case, please connect your
IkaScope to a USB port with the provided cable to recharge it. Refer to the LEDs Behavior section to
ensure the battery is being correctly charged. Read the safety section first.
(c) Ikalogic SAS
Advertisement
Table of Contents
