Table of Contents
Advertisement
IkaScope WS200 Ultra portable oscilloscope
2V/div
5V/div
10V/div
3 4
General
Input protection
Input to USB galvanic isolation
Built-in lithium battery
Communication interface
Operating, recharging conditions
Storage conditions
Charging method
3
Input isolation is defined according to measurements made on sample units taken from production batches. Do not
exceed ±40V between any measurement terminal and USB port.
4
The IKASCOPE should not be used during the battery charge in order to speed up the battery charge time.
(c) Ikalogic SAS 2019
38 MHz
38 MHz
30 MHz
253 VAC during 1 minute (production sample test,
not tested in production, not guaranteed). Do NOT
exceed
40V!
520 VAC 1 minute (production sample test, not
tested in production, not guaranteed). Do NOT
exceed
40V!
420 mAH
Wifi 802.11 b/g/n/e/i 2.4 GHz.
Access point or Station
10°C to 30°C. NEVER exceed these limits, as it could
damage the battery and the product
< 80% HR non-condensing
Dust free environment
Altitude < 2000m
10°C to 40°C. NEVER exceed these limits, as it could
damage the battery and the product
< 80% HR non-condensing
Dust free environment
Altitude < 2000m
Micro USB port (5V
with USB compliant port.
WS200
0.1V, 500mA), recharge only
8/21
Advertisement
Table of Contents
