Table of Contents
Advertisement
SKY899
Installation Manual
About This Manual
SECTION 1 – GENERAL INFORMATION
This section includes equipment specifications and a functional description. It describes the various
hardware configurations and includes a list of items furnished and items required but not supplied with
the equipment.
SECTION 2 - INSTALLATION
This section contains instructions for unpacking the equipment and inspection for in-shipment damage. It
also includes information required to locate, assemble and install the equipment.
SECTION 3 – INSTALLATION CHECKOUT
This section contains instructions for doing post-installation and return to service checkout of the
SKY899 using the TT391 Flightline Tester.
SECTION 4 – MAINTENANCE
This section contains general flightline maintenance procedures. It includes periodic maintenance,
troubleshooting, and instructions for the return of defective components.
APPENDIX A – SIGNAL AND CABLE CHARACTERISTICS
This appendix defines the electrical characteristics of all input and output signals.
APPENDIX B – ENVIRONMENTAL QUALIFICATION FORM
This appendix has the environmental qualification forms for the TRC899, NY156 & NY164 antennas,
and WX-1000/SKY497 display.
APPENDIX C – INSTALLATION CHECKOUT USING THE TCAS-201 RAMP TEST SET
This appendix contains instructions for doing post-installation and return to service checkout of the
SKY899 using the IFR Systems TCAS-201 Ramp Test Set (with TCAS I firmware).
APPENDIX D – INSTALLATION CHECKOUT USING THE TIC T-49C FLIGHTLINE TESTER
This appendix contains instructions for doing post-installation and return to service checkout of the
SKY899 using the TIC T-49C Flightline Tester.
APPENDIX E – USING THE TERMINAL DEVICE
This appendix contains instructions for using the Terminal Device for installation, testing or
troubleshooting of the SKY899.
APPENDIX F – INSTALLATION CHECKOUT USING AN ALTERNATE DISPLAY
This appendix contains instructions for doing post-installation and return to service checkout of the
SKY899 using an Alternate Display.
APPENDIX G – SKYWATCH HP SKY899 PERMISSION TO USE STC SA01552CH-D
This appendix grants permission to L-3 Avionics Systems dealers, installers and owners of the SKY899
system to use STC SA01552 CH-D and data associated with it for the sole purpose of installation
approval.
APPENDIX H – INSTALLATION CHECKOUT USING THE IFR-6000 RAMP TEST SET
This appendix contains instructions for doing post-installation and return to service checkout of the
SKY899 using the IFR-6000 Ramp Test Set.
009-11900-001
Page i
Revision F
July 18, 2013
The document reference is online, please check the correspondence between the online documentation and the printed version.
Advertisement
Table of Contents
