4.4.2.3 Data Monitor
The data monitor menu consists of 7 data monitors. All data is real-time and is updated to the screen once
per second.
The Data Monitor menu provides the following choices:
Values displayed on the Data Monitor are continuously updated. The
sensor source is read at power-up or whenever a configuration change
has been saved. You can change the sensor source, save it and have the
data monitor reflect the change without cycling power to the system.
This will help in troubleshooting installation problems.
The ARINC 429 Receivers Data Monitor screen shows the configuration of the ARINC 429 receivers. If
any parity errors were detected the error count per channel will be shown. A large increasing number of
parity errors may indicate the 429 wiring for that channel is reversed.
Page 4-14 - Maintenance
July 18, 2013
The document reference is online, please check the correspondence between the online documentation and the printed version.
SKY899
Installation Manual
Figure 4-28: Data Monitor Menu
NOTE
Figure 4-29: ARINC 429 Receivers Data Monitor
009-11900-001
Revision F