Chapter 1: Welcome - SMART Board 4000 Series Installation Best Practices

Chapter 1
Welcome
This document provides guidance for installing the following SMART products:
SMART Board® interactive whiteboards
l
SMART Board interactive whiteboard systems (with projectors)
l
SMART Board 4000, 8000i-G3 and 8000i-G4 series interactive flat panels
l
SMART Room System™ for Skype® for Business
l
SMART Room System™ with SMART Meeting Pro® software
l
LightRaise® interactive projectors
l
SMART kapp® boards
l
SMART Table® interactive learning centers
l
It describes best practices and the standard tasks and equipment needed for a successful
equipment installation.
NOTE
For similar information about newer SMART products, refer to those SMART products' "Installing
and maintaining" sections in smarttech.com/support.
This document also provides guidance for those who wish to deviate from a standard installation
by including third-party equipment. SMART describes an installation that deviates from a standard
equipment installation as a "non-standard installation."
Because SMART has no control over products manufactured by a third party, SMART can not make
recommendations regarding the use of specific third-party equipment with SMART products.
However, SMART has compiled a list of companies that are likely to be able to provide assistance
in these areas. These referrals are found in Appendix A: Third-party referrals on page 69.
Contact your installer, reseller or equipment manufacturer for support with equipment you use as
part of a non-standard installation. SMART can not provide support beyond that which is presented
in this document.
1 smarttech.com/kb/171035