Installing The Smart Product On A Stand; Mounting Multiple Smart Products - SMART Board 4000 Series Installation Best Practices

CHAPTER 2
INSTALLING THE PRODUCT
Non-standard orientation can affect ventilation, creating hotpots in equipment, premature
l
failures and, in SMART products that use projectors, exploding projector bulbs.
TIP
The only SMART product that supports a horizontal orientation is the SMART Table interactive
learning center.
Mounting multiple SMART products
A multiple-SMART product configuration can include two or more SMART products in a variety of
arrangements. SMART recommends that you mount no more than three SMART products side by
side.
NOTE
Different SMART products support multiple-SMART product configurations to varying degrees.
Consult a SMART product's documentation before including it in a multiple-SMART product
configuration.
Although a computer can support up to 16 touch-sensitive SMART products, the demands on the
computer and graphics card increase as you add more SMART products. If you want to use more
than three SMART products, SMART recommends that you work closely with an experienced
installer.

Installing the SMART product on a stand

If you want to move the SMART product from place to place or if it's not possible to install the
SMART product on a wall, you can install it on a stand.
NOTE
SMART does not recommend using mobile stands with SMART products that include multiple
components and cables, such as the SMART Room System. Cables and table equipment
(including microphones and speakerphones) can be damaged easily and are difficult to manage.
Contact SMART Support for advice if you choose to use a mobile stand with components in
addition to the SMART product. Any damage to components that results from being mounted on
a mobile stand will likely not be covered by the warranty.
16 smarttech.com/kb/171035