Selecting Tools; Selecting A Wall Mount - SMART Board 4000 Series Installation Best Practices

CHAPTER 2
INSTALLING THE PRODUCT
Additional hardware may be required for the installation of the SMART product. This hardware can
include:
Fasteners
l
Washers
l
Wall anchors
l
If possible, use the hardware that comes with the SMART product. Consult the installation
instructions or the manufacturer of third-party mounting hardware for guidance on the type of
hardware to use with the wall type.
NOTE
Some SMART products do not include mounting hardware. Consult the SMART product's
installation instructions for a complete list of included hardware.

Selecting tools

Tools commonly used in the installation of a SMART product include:
Drill and drill bits
l
Level
l
Stud finder
l
Screw drivers
l
Tape measure
l
Hole saw
l
Although SMART products typically don't include the tools used for installation, the installation
instructions list the tools you'll need.

Selecting a wall mount

It is always best to mount the SMART product on a wall. If the wall can't support the
SMART product's weight, you can use additional hardware to transfer some of the weight to the
floor.
13 smarttech.com/kb/171035